Essential Sliding Patio Door

Essential Sliding Patio Door


Contents

Standard Features

2 and 3 Panel Configurations, Direct Glaze Transom

Special Size Patio Door and Transom

Options

Pricing Procedures for Assemblies

Replacement Panel, Frame Only, Replacement Glass

Configured Part Options

Product Detail References

The actual invoice price of some items may vary slightly from the prices listed in the Marvin Online Documents price guide pages. Such minor variations are inherent to the pricing system. No adjustments will be made to compensate for minor variations.

Please refer to the Marvin Order Management System (OMS) for the most-up-to-date pricing.

Standard Features

Sliding Patio Door

  • Stone White Ultrex panel and frame interior and exterior.
  • Screen with white surround.
  • Cambridge single-point mortise lock with white interior and exterior handle.
  • 3 3/8" jambs.
  • Glazed IG one-lite Tempered Low E2 Argon. Argon gas is subject to minimum size limitations as validated by OMS.
  • Single units: factory applied folding nailing fin and drip cap.
  • Multiple assemblies: factory applied nailing fin, drip cap, and structural brackets.
  • Capillary tubes required for IG units at high elevations. Argon will not be furnished in units with capillary tubes.

Abbreviations

ESSPD Essential Sliding Patio Door
ESSPDDGTR Essential Sliding Patio Door Direct Glaze Transom 

2 and 3 Panel Configurations, Direct Glaze Transom

2 and 3 Panel Configurations


Direct Glaze Transom


See Options pages for Sliding Patio Door and Transom options.



Special Size Sliding Patio Door and Direct Glaze Transom


Special Size Unit

To price a special size Sliding Patio Door:

  • Begin with the price of the next larger standard size unit with options.
  • Add the special size up-charges from the chart below.
Description List Price
Special Size Unit $483 /panel
Special Size Sliding Screen 106 /screen panel

Special Size Transom

To price a special size Transom using SINGLE UNIT Rough Opening IN INCHES, ADD

  1. Base charge.
  2. Calculated lineal foot charge (Width x 2) PLUS (Height x 2) DIVIDED by 12.
  3. Calculated square foot charge (Width x Height) DIVIDED by 144.
  4. Round all formula based pricing to the nearest whole dollar.
Unit Type Base Charge Lineal Foot Charge Square Foot Charge
Sliding Patio Door Direct Glaze Transom $152.00 $15.25 $17.00

See Options pages for Sliding Patio Door and Transom options.


Sliding Patio Door Options

Description ADD/ DEDUCT List Price
Sliding Patio Door
Bronze, Cashmere, Ebony, Evergreen, or Pebble Exterior ADD $42.00 /panel
Bronze/Bronze or Ebony/Ebony Exterior/Interior with Bronze Sill ADD 102.00 /panel
4 9/16" Jamb Extensions Installed ADD 33.00 /panel
6 9/16" Jamb Extensions Installed ADD 72.00 /panel
White Jamb Extension with Ebony or Bronze Interior
Add to jamb extension price per unit
ADD 6.00 /panel
Installation
4" or 6" Structural Brackets (no nailing fin) ADD No Charge
Sheetrock Return Installed ADD 24.00 /panel
3/4" Receiver Installed ADD 24.00 /panel
J-Channel (shipped loose) ADD 24.00 /panel
White Accessory with Ebony or Bronze Interior Sheetrock Return or 3/4"
Receiver only
Add to accessory price per unit
ADD 6.00 /panel
Glass and Divided Lites
Refer to the Elevate/Essential Glass & Divided Lite section for glass and divided lite option available and pricing
Hardware
White, Almond Frost or Matte Black Cambridge or Northfield Primary
Handle - Interior or Exterior
ADD No Charge
White, Almond Frost, Bronze, or Matte Black Slim Handle - Exterior ADD No Charge
Brass PVD, Satin Nickel PVD, or Oil Rubbed Bronze PVD Cambridge or
Northfield Primary Handle - Interior or Exterior
ADD 88.00 /handle
Keyed Handle ADD 44.00 /handle
Keyed Alike ADD 19.00 /handle
Casing
3 1/2" Flat or Flat Ranch Casing - Field Applied ADD 14.25 /LF of R.O.
2" Brick Mould Casing - Field Applied ADD 12.75 /LF of R.O.
Sliding Patio Door Direct Glaze Transom
Bronze, Cashmere, Ebony, Evergreen, or Pebble Exterior ADD $25.00 /unit
Bronze/Bronze or Ebony/Ebony Exterior/Interior ADD 77.00 /unit
4 9/16" Jamb Extensions Installed ADD 57.00 /unit
6 9/16" Jamb Extensions Installed ADD 116.00 /unit
White Jamb Extension with Ebony or Bronze Interior
Add to jamb extension price per unit
ADD 6.00 /unit
Installation
4" or 6" Structural Brackets (no nailing fin) ADD No Charge
Sheetrock Return Installed ADD 30.00 /unit
3/4" Receiver Installed ADD 30.00 /unit
J-Channel (shipped loose) ADD 30.00 /unit
White Accessory with Ebony or Bronze Interior Sheetrock Return or 3/4"
Receiver only
Add to the accessory price per unit
ADD 6.00 /unit
Glass and Divided Lites
Refer to the Elevate/Essential Glass & Divided Lite section for glass and divided lite option available and pricing.
Casing
3 1/2" Flat or Flat Ranch Casing (w/ or w/o Sill Nose) - Field Applied ADD 14.25 /LF of R.O.
2" Brick Mould Casing (with or without Sill Nose) - Field Applied ADD 12.75 /LF of R.O.
  • All formula based pricing is rounded to the nearest whole dollar.
  • Bronze sill available only when ordered with a Bronze/Bronze or Ebony/Ebony unit.
  • Sheetrock Return, 3/4" Receiver, Interior Frame Filler, 4 9/16" and 6 9/16" Jamb Extensions are available in Bronze or Ebony only when ordered with a Bronze/Bronze or Ebony/Ebony unit.
  • Handle sets require one interior and one exterior selection.
  • The 32" Net Clear Opening Handle is available for Essential Sliding Patio Door units to achieve a 32" net clear opening on 3-panel configurations. For additional performance information, refer to the Essential Architectural Detail Manual or contact your Marvin representative.
  • The top hung screen surround finish will be determined by the unit exterior finish.
  • ESSPD: Casing lineal footage is based on one Rough Opening width plus two Rough Opening heights.
  • ESSPDDGTR: Casing lineal footage is based on two Rough Opening widths plus two Rough Opening heights.
  • A Frame Expander Accessory and Sash Limiter Kit are available for Essential Collection units. These must be ordered separately by part number. Refer to the Essential Parts and Service Manual or OMS for part number and price.

Pricing Procedures for Assemblies

To price mulled assemblies:

  1. ADD individual units with options.
  2. PLUS appropriate mull charge(s).
Description ADD/ DEDUCT List Price
Standard 1/2" Space Mull Assemblies ADD No Charge
1/2" Mull Reinforcement Assemblies ADD $84.00 /mull
1/2" Mull Reinforcement Assemblies PLUS 11.50 /LF per mull

Multiple assemblies can be factory mulled:

up to 1 unit wide by 2 units high

             Maximum Rough Opening not to exceed 72" x 100

FIELD MULLING BEYOND 110" x 112" IS NOT RECOMMENDED.


Rough Opening For Assemblies

WIDTH: ADD all Rough Opening unit widths = Total Assembly Rough Opening Width

HEIGHT: ADD all Rough Opening unit heights = Total Assembly Rough Opening Height

Replacement Panel, Frame Only, Replacement Glass

Stone White Operator/Stationary Replacement Panel - Sliding Patio Door

List Price per Panel


Stone White Frame Only - Sliding Patio Door

List Price per Frame


Direct Glaze Transom Replacement Glass and Stops

To price replacement glass and stops for Transoms using SINGLE UNIT Rough Opening IN INCHES, ADD

  1. Base charge.
  2. Calculated square foot charge (Width x Height) DIVIDED by 144.
  3. Round all formula based pricing to the nearest whole dollar.
Unit Type Base Charge Square Foot Charge
Sliding Patio Door Direct Glaze Transom Replacement Glass $32 $24

Configured Part Options

Description ADD/ DEDUCT List Price
Bronze, Cashmere, Ebony, Evergreen, or Pebble Exterior - Replacement Panel ADD $42 /panel
Bronze, Cashmere, Ebony, Evergreen, or Pebble Exterior - Frame Only ADD 21 /panel
Bronze/Bronze or Ebony/Ebony Replacement Panel ADD 102 /panel
Bronze/Bronze or Ebony/Ebony Frame Only ADD 51 /panel
4 9/16" Jamb Extensions Installed ADD 33 /panel
6 9/16" Jamb Extensions Installed ADD 72 /panel
White Jamb Extension with Ebony or Bronze Interior
Add to jamb extension price per unit
ADD 6 /panel
Installation
Sheetrock Return Installed ADD 24 /panel
3/4" Receiver Installed ADD 24 /panel
White Accessory with Ebony or Bronze Interior Sheetrock Return or 3/4"
Receiver only
Add to accessory price per unit
ADD 6 /panel
Special Size - begin with the next larger standard CN price
Special Size Replacement Panel ADD 242 /panel
Special Size Frame ADD 242 /panel

Product Detail References

For more information and images, please see the Marvin Essential Sliding Patio Door page on Marvin.com.

For additional product detail and replacement part information, please refer to the following Architectural Detail Manual (ADM) and/or Parts Manual chapters. Please refer to the following ADM and Parts Manual chapters.

  • Essential Sliding Patio Door ADM
  • Essential Sliding Patio Door Parts Manual
  • Essential Direct Glaze Polygon and Rectangle Parts Manual

The Architectural Detail Manual includes the following and more.

  • Minimum/maximum size guidelines.
  • Standard unit dimensions.
  • Certified sizes.
  • Measurement conversions.
  • Section details.
  • Divided lite patterns.




Still need help? Contact Us Contact Us