ULTIMATE DOUBLE HUNG TILT PAC, ULTIMATE WOOD DOUBLE HUNG TILT PAC

ULTIMATE DOUBLE HUNG TILT PAC

ULTIMATE WOOD DOUBLE HUNG TILT PAC

Contents

History − Ultimate and Ultimate Wood Double Hung Tilt Pac

Replacement Parts

Parts − Ultimate and Ultimate Wood Double Hung Tilt Pac

Balances − Ultimate and Ultimate Wood Double Hung Tilt Pac

Jamb Liners − Ultimate and Ultimate Wood Double Hung Tilt Pac

Jamb Hardware Assemblies − Ultimate and Ultimate Wood Double Hung Tilt Pac

Wood Parts − Ultimate and Ultimate Wood Double Hung Tilt Pac

Weather Strip − Ultimate and Ultimate Wood Double Hung Tilt Pac

Sash Replacement − Ultimate and Ultimate Wood Double Hung Tilt Pac

ATTENTION:

• Specification and technical data are subject to change without notice.
• Numbers listed in parentheses ( ) are metric equivalents in millimeters rounded to the nearest whole number.

History

Replacement Parts

Parts − Ultimate and Ultimate Wood Double Hung Tilt Pac

When ordering replacement parts specify:

• Type of unit
• Part number
• Description

ILLUSTRATION NOT TO SCALE	DESCRIPTION	OPERATION/ COLOR	PART NO.
	Sash Lock and Keeper, Complete Package of 200 Includes: 200 − Sash lock 200 − Keeper 800 − #7x7/8″ Phillips flathead wood screws Sash Lock and Keeper, Complete Includes: 1 − Sash lock 1 − Keeper 4 − #7 x 7/8″ Phillips flathead wood screws	Satin Taupe Bronze White Satin Taupe Bronze White	11900925 11900920 11900910 11869399 11869395 11869396
	Sash Lock Includes: 1 − Sash lock 2 − #7 x 7/8″ Phillips flathead wood screws	Satin Taupe Bronze White Brass Antique Brass Polished Chrome Satin Chrome Oil Rubbed Bronze Satin Nickel	10818034 10818033 10840026 05600082 05600084 05600086 05600088 05600090 05600092
	Keeper Usage: 10−15−2012 − Present Includes: 1 − Keeper 2 − #7 x 7/8″ Phillips flathead wood screws	Satin Taupe Bronze White Brass Antique Brass Polished Chrome Satin Chrome Oil Rubbed Bronze Satin Nickel	10818052 10818051 10818050 10818053 10818054 10818055 10818056 10818057 10818058
	Keeper − Pre 10−15−2012	No longer available − Use current keeper
	Sash Lock, Keyed Includes: 1 − Keyed lock 2 − Keys 2 − #6x1″ Phillips flathead wood screws	Satin Taupe Bronze White	05590634 05590632 05590633
	Keeper For keyed sash lock Includes: 1 − Keeper 2 − #6x1″ Phillips flathead wood screws	Satin Taupe Bronze White	10817047 10817043 10840014
	Sash Lift Includes: 1 - Sash lift 2 -#8 x 1, Slotted oval head sheet metal screws	Satin Taupe Bronze White Brass Antique Brass Polished Chrome Satin Chrome Oil Rubbed Bronze Satin Nickel	10500598 10500557 10500556 10500558 10500597 10500595 10500596 10500601 10500602
	Sash Pivot, Winged Includes: 1 - Sash pivot 1 - 1 5/8, Phillips trimhead self tapping screw NOTE: Pivot handing is viewed from the interior.	LH RH	11869348 11869347
	Sash Retainer Plate Includes: 1 - Sash retainer plate 2 - #7x7/8, Phillips flathead wood screws	LH Bronze White RH Bronze White	11870474 11870476 11870473 11870475
	Sash Limiter M726 Includes: 1 - Sash limiter 2 - #6x5/8, Phillips flathead wood screws	Beige	05070431
	Installation Clip, Jamb Liner M112 1, x 3 3/8,		11860011
	S-Hook, Short, 1/4, (6) Wide Top sash balance Used for Regular and Heavy Duty balances		11870727
	S-Hook, Long, 1/4, (6) Wide Bottom sash balance Used for Regular and Heavy Duty balances		11870731
	S-Hook Heavy Duty, Short, 3/8, (10) Wide Top sash balance Used for Extra Heavy Duty 2 balance		11870737
	S-Hook Heavy Duty, Long, 3/8, (10) Wide Bottom sash balance Used for Extra Heavy Duty 2 balance		11870741
	Sash Stop, Vinyl V177 1 3/4″ (44) length	White Beige	11860114 11860116
	Foam Plug (Chimney Block) Located at the bottom of the vinyl  jamb liner  1″x9/16″x3/4″	White	10502001
	Foam, Adhesive Backed Foam block on the back of the jamb liner 1/2″x1 1/2″x3/8″	Black	10500200
	Clutch Regular Heavy Duty Extra Heavy Duty Super Heavy Duty	Beige Black Blue Brown	11870480 11870482 11870481 11870483
	Jamb Liner Foam Located behind the vinyl jamb liner 7/16″x2 3/4″	Specify Length	10500009
	Jamb Liner Foam, Single Hung MISC 004 With PVC edge 9/16″x1 7/16″	Specify Length	10500014
	Sash Bracket, Single Hung M111 Includes: 1 − Sash bracket 4 − #6x5/8″ Phillips Flathead screws	Mill Finish	11040360
	Tilt Pac Hardware Box Double Hung Tilt Pac only Package includes two sash stops Includes: 2 − Foam gaskets − 10500100 2 − White sash stops − 11860114 2 − Beige sash stops − 11860116 10 − Installation clips − 11860011 1 − Instruction − 19970103		11900510
	Foam Gasket, Tilt Pac Top Track NOTE: For single hung cut to fit Ultimate Wood Ultimate	White	10500100 10500102
	Installation Clip, Jamb Liner Single Hung Tilt Pac Only Package of 8 Includes: 1 − Split installation clip 2 − Sash stops 4 − Sash brackets 16 − #6x5/8″ Phillips Flathead screws	White Beige	11900790 11900795

Balances − Ultimate and Ultimate Wood Double Hung Tilt Pac

DOUBLE HUNG BALANCES 1975 TO PRESENT

When ordering replacement balance tubes, provide the following information:
1. Provide an original order number
2. Provide a part number*. Part numbers can be determined by using the balance size (see illustration) and referring the chart on the next page.
NOTE: Size of balance is imprinted on tube.
3. Specify top or bottom sash. The balance tube for the top sash is in the exterior track and has a short S−hook. The balance tube for the bottom sash is in the interior track and has a long S−hook.
4. Specify the quantity. Do NOT specify as pairs or sets. If one tube is needed, specify: qty 1.
If four tubes are needed, specify: qty 4.

* In some applications a part number will not be available. In this case, please provide as much of the above information as possible along with the glass size and glass make−up.

NOTE: If an energy panel was installed after the original purchase, a heavier balance may be necessary. 

NOTE: S−hook(s) are provided when balance tubes are ordered.

E−Z TILT BALANCED CLUTCHES ARE COLOR CODED

Part numbers listed below are for one balance only. Each sash requires two balances.

Specify top or bottom sash. T = Top Sash B = Bottom Sash

Jamb Liners

Ultimate and Ultimate Wood Double Hung Tilt Pac

ORDERING REPLACEMENT CLIP MOUNT JAMB LINERS FOR TILT PAC

Replacement jamb liners include a pair of clip mount vinyl jamb

liners, jamb liner foam, foam plugs, foam gaskets, pile weather strip, adhesive backed foam block and sash stops.

Jamb liners for standard Tilt Pac may be ordered by part number from the chart below.

NOTE: Jamb liners must be ordered in pairs.

When ordering jamb liners for special sized Tilt Pacs, please provide the following information:

1. Original order number if available
2. Specify Tilt Pac type (DH or SH).
3. Specify clip mount.
4. Provide length (see dimension A on illustration) or glass height (s).
5. Specify color (beige or white).
6. Provide sill bevel. (Standard bevel is 14°).

NOTE: Special bevel jamb liners are shipped long to be trimmed in the field

* Contact your Marvin representative for ordering information

Jamb Hardware Assemblies

Ultimate and Ultimate Wood Double Hung Tilt Pac

ORDERING REPLACEMENT JAMB HARDWARE FOR TILT PAC

Replacement jamb hardware assemblies complete include a pair of clip mount vinyl jamb liners, jamb liner foam, foam plugs, foam gaskets, pile weather strip, adhesive backed foam block, sash stops, installation clips, S−hooks and balance tubes.

NOTE: Jamb liners must be ordered in pairs.

Jamb Hardware Assemblies Complete for standard Tilt Pacs may be ordered by part number. See charts below. 

Jamb Hardware Assemblies complete for special Tilt Pacs, please include the following information:

1. Provide original order number if available.
2. Specify type of Tilt Pac, (DH or SH).
3. Specify clip mount.
4. Specify color of liner (beige or white).
5. Provide length (see dimension A) ir glass height (s).
6. Provide balance size(s)* The balance size is imprinted on the tube, (see illustration).
7. Provide sill bevel. (Standard bevel is 14°)

NOTE: Special bevel jamb liners are shipped long to be trimmed in the field.

* If the balances are oversized, a balance size may not be available. In this case, provide the glass width, height and makeup.

REGULAR (WHITE CLUTCH)

* Glass height of top sash 24″. Glass height of bottom sash 36″. (all clutches white)
** Glass height of top sash 24″. Glass height of bottom sash 36″ (2 clutches white, 2 clutches black)

CLIP MOUNT REPLACEMENT JAMB HARDWARE FOR E−Z TILT PAC (CONT.)

HEAVY DUTY (BLACK CLUTCH)

* Glass height of top sash 24″. Glass height of bottom sash 36″. (all clutches black)

EXTRA HEAVY DUTY (BLUE CLUTCH)

* Glass height of top sash 24″. Glass height of bottom sash 36″. (all clutches blue)

SUPER HEAVY DUTY (BROWN CLUTCH)

* Glass height of top sash 24″. Glass height of bottom sash 36″. (all clutches brown)

REPLACEMENT WOOD PARTS

Ultimate and Ultimate Wood Double Hung Tilt Pac

TO ORDER REPLACEMENT WOOD PARTS

When ordering replacement wood parts specify:

• Profile number
• Call number or rough opening
• Length
• Finish

Ultimate Wood	Ultimate
W10495	W10495	3/8 Tilt Pac Part Stop (optional)
W7082	W7082	Parting Stop
W7090		Stationary Sash Filler

Weather Strip 

Ultimate and Ultimate Wood Double Hung Tilt Pac

When ordering replacement weather strip specify:

• Quantity
• Color
• Part number
• Description

ILLUSTRATION NOT TO SCALE	DESCRIPTION	LENGTH	NUMBER PART
	Bulb Weather Strip, Bottom Rail V192 Color: Beige	84″ (2134)	15900058
	Dual Seal Weather Strip, Check Rail V116 Color: White	84″ (2134)	15828400
	Hinged Leaf Weather Strip, Parting Stop V245 Color: White	84″ (2134)	15818400
	Pile Weather Strip (Dust Fuzzy), Jamb Hardware 3/8″x1 1/4″ x 1/8″ Color: White		10600000
	Pile Weather Strip, Top Blind Stop and Sash Stiles M 730 3/16″ x 5/32″ Ultimate units only Color: Gray	Specify length	15607560

Sash Replacement

Ultimate and Ultimate Wood Double Hung Tilt Pac

ORDERING REPLACEMENT SASH FOR TILT PAC

When ordering replacement sash specify:

1. Which sash is being replaced − top, bottom or pair

2. Size
    a. Top or bottom (call number or OM of sash)
    b. Pair (call number or sash opening − indicate if unequal sash)
3. Glazing;
   a. Ultimate Wood (SDL ready glazing profile only)
   b. Ultimate (standard glazing)
4. Finish
5. Sill bevel if other than standard 14°.