Ultimate Tilt Turn
The Marvin Signature™ Ultimate Tilt Turn window is a European-style window with two distinct functions: swing it in like a door or tilt the top of the sash into your room for ventilation. One handle controls both operations. The tilt turn is ideal for providing fresh air or access in cases where an egress option is needed. In European-style designs, it’s often used instead of a door to access a Juliet balcony.
Contents
Ultimate Wood Tilt Turn 4 9/16 and Ultimate Wood Tilt Turn Casement Inswing 4 9/16
Ultimate Wood Tilt Turn and Ultimate Wood Tilt Turn Casement Inswing
Ultimate Wood Direct Glaze Tilt Turn Stationary 4 9/16
Ultimate Tilt Turn 4 9/16 and Ultimate Tilt Turn Casement Inswing 4 9/16
Ultimate Tilt Turn and Ultimate Tilt Turn Casement Inswing
Ultimate Wood: Tilt Turn Round Top and Tilt Turn Inswing Casement Round Top 4 9/16
Frame and Sash Hardware Locations − Tilt Turn
Interior Energy Panels and Parts
Discontinued Frame and Sash Hardware Locations − Tilt Turn
Discontinued Parts (LA) − Limited Availability
Discontinued Parts (NA) − No Availability
Discontinued Sash Replacement (LA) − Limited Availability − Pre 6/6/2006
Discontinued Screens and Screen Parts − (LA) − Limited Availability − Pre 2/27/2012
Discontinued Screen Parts − (NA) − No Availability − Pre 2/27/2012
ATTENTION:
- Specification and technical data are subject to change without notice.
- Numbers listed in parentheses ( ) are metric equivalents in millimeters rounded to the nearest whole number.
History
| Produced | Unit Type | Features or Changes | Status |
| 1984 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Hopper, Tilt Turn Casement Inswing, Tilt Turn Round Top |
Tilt Turn, Hopper and Casement Inswing introduced. Units feature 2 13/32″ or 4 9/16″ jambs. Stationary units available as in-sash or keyed units. Tilt Turns feature unique two mode operation controlled by one handle. Hopper units have one mode of operation, tilting at the top for ventilation. Inswing Casements turn in and do not tilt. These units have no standard sizes. |
Present |
| 1985 | Ultimate Wood: Direct Glaze Tilt Turn Stationary |
Direct glaze stationary units (without hardware) introduced. | Present |
| 1986 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Hopper Tilt Turn Round Top |
New jamb extension profiles and attachment location for wood units in early 1986, clad units mid 1986. Because of new profiles and attachment location frame sizes changed in width and height. |
Present |
| 1988 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Casement Inswing Tilt Turn Round Top |
Handing policy changed from European standard (viewed from the interior) to being viewed from the exterior (Marvin standard). Right or left hand identification on hinges should be disregarded. |
Present |
| 1988 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Hopper Tilt Turn Casement Inswing |
Jamb extension for multiple assemblies now applied to the perimeter head jamb, side jambs and sill as well as continuous extensions applied to selected intermediate mulls. |
Present |
| 1992 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Hopper Tilt Turn Casement Inswing Tilt Turn Round Top |
Simulated divided lite option introduced. | Present |
| 1993 | Ultimate: Tilt Turn, Tilt Turn Hopper Tilt Turn Casement Inswing |
Introduced factory installed clad brick mould casing and simulated divided lite option. |
Present |
| 1994 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Hopper, Ultimate Tilt Turn Casement Inswing |
Interior energy panel surround changed from vinyl to metal. | Present |
| 1997 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Casement Inswing Tilt Turn Round Top |
Top Hinge change. | 2000 |
| 2000 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Casement Inswing Tilt Turn Round Top |
1/26/00 Tilt Turn Round Top and Tilt−Turn: Top and bottom hinge change. 1/26/00 Casement Inswing snubber at center changed to a pinned hinge. Top and bottom hinge change. |
Present |
| 2000 | Ultimate and Ultimate Wood: Tilt Turn Hopper |
9/00 Frame and sash snubber changed. | Present |
| 2002 | Ultimate: Tilt Turn, Tilt Turn Hopper Tilt Turn Casement Inswing |
3/02 Stone White becomes a standard color. Arctic White transitions to a select color. |
Present |
| 2006 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Hopper Tilt Turn Casement Inswing |
5/22/06 Roto Centro 101 (YZD) hardware was discontinued and replaced with the Roto NT (metal gray) hardware system. |
Present |
| 2009 | Ultimate and Ultimate Wood: Tilt Turn, Tilt Turn Casement Inswing |
6/22/09 New part numbers for bottom corner hinge, pivot rest, and caps. Design change by supplier. |
Present |
| 2010 | All | 2/03/2010 Added a .313 by .031 thick bumper to the glazing bed of the Magnum Tilt−Turn units (wood and clad). |
Present |
| 2011 | All | 04/25/2011 Added LoĒ-180™ as a standard option for all products. White painted interior finish option introduced for all products. |
Present |
| 2012 | Ultimate and Ultimate Wood Tilt−Turn | 02/27/2012 Upgraded screen which will now offer Hi Transparency screen mesh as the standard. | Present |
| 2012 | All | 10/29/2012 Interior Square Sticking/Glazing Bead option introduced. | Present |
| 2012 | All | 12/17/2012 Introduced Clear interior finish option on all products. | Present |
| 2013 | All | 04/29/2013 Introduced interior stain options. Stain colors are Wheat, Honey, Leather, Hazelnut, Cabernet and Espresso. |
Present |
Part Identification
Ultimate Wood Tilt Turn 4 9/16 and
Ultimate Wood Tilt Turn Casement Inswing 4 9/16
NOTE: Hopper part identification is the same with the exception of handle location.
NOTE: Not to scale; specifications subject to change without notice.
Ultimate Wood Tilt Turn and
Ultimate Wood Tilt Turn Casement Inswing
NOTE: Hopper part identification is the same with the exception of handle location.
NOTE: Not to scale; specifications subject to change without notice.
Ultimate Wood Direct Glaze Tilt Turn Stationary 4 9/16
NOTE: Not to scale; specifications subject to change without notice.
Ultimate Tilt Turn 4 9/16 and
Ultimate Tilt Turn Casement Inswing 4 9/16
NOTE: Hopper part identification is the same with the exception of handle location.
NOTE: Not to scale; specifications subject to change without notice.
Ultimate Tilt Turn and
Ultimate Tilt Turn Casement Inswing
NOTE: Hopper part identification is the same with the exception of handle location.
NOTE: Not to scale; specifications subject to change without notice.
Ultimate Wood: Tilt Turn Round Top and
Tilt Turn Inswing Casement Round Top 4 9/16
NOTE: Not to scale; specifications subject to change without notice.
Frame and Sash Hardware Locations − Tilt Turn
| 1. Corner Drive E−Cam 2. Additional Scissor Stay−Sash 3. Sash Stay Guide 4. Sash Stay Arm 5. Corner Drive Stay 6. Center Lock, 600mm 7. Espagnolette 8. Mishandling Device Sash 9. Corner Drive Tilt−Turn 10. Center Lock, 600mm |
11. Corner Hinge 12. Striker 13. Additional Scissor Stay−Frame 14. Sash Stay Bearing 15. Pivot Rest 16. Striker, Tilt−Turn 17. Mishandling Device Frame 18. Steel Security Striker 19. Pin, Sash Stay Bearing |
||||
NOTE: Not to scale; specifications subject to change without notice.
Parts
When ordering replacement parts specify:
- Type of unit
- Part number
- Description
NOTE: Always determine handing of parts from the exterior (hinged side). Since the vendor determines handing from the interior, some parts may be stamped with an “L” or “R.” For Marvin handing identification, an “L” will mean right hand and an “R” will mean left hand. DO NOT SPECIFY USING VENDOR METHOD.
| ILLUSTRATION NOT TO SCALE |
DESCRIPTION | PART NO. | |
 |
Pistol Grip Handle All Tilt Turn products Includes: 1 − Pistol grip handle 1 − Installation package with #5x35mm machine screws |
Bronze White Satin Chrome Brass |
11900114 10815195 11900110 10143000 |
 |
Keyed Handle (with cylinder and keys) All Tilt Turn products Includes: 1 − Keyed handle with cylinder and 2 keys 1 − Installation package with #5x35mm machine screws NOTE: Handle style may vary depending |
Bronze White |
11900112 11900111 |
 |
Stationary Lock Handle Casement Inswing Includes: 1 − Stationary lock Handle |
10820313 | |
 |
Security Lock Kit Tilt Turn Includes: 1 − Security Lock/Keeper/Key Metal gray − 10811781, White − 10811782 2 − #8x1″ SS flat head screws (11800805)) 2 − #8x1 1/2″ Phillips flat head screws (11808110) 1 − Installation instruction |
Metal Gray White |
11852600 11852601 |
 |
Stationary Lock Casement Inswing Includes: 1 − Stationary lock 2 − #8x35mm Phillips head machine screws |
Bronze | 10815124 |
 |
Striker, Security Casement Inswing Includes: 1 − Security Striker 2 − #8x1 1/2″ Phillips flat head screws (11808110) |
LH RH |
10811760 10811761 |
 |
Striker Tilt Turn, Hopper, Casement Inswing Includes: 1 − Striker 1 − #8x1 1/2″ Phillips flat head screws (11808110) |
10811701 | |
 |
Striker, Steel Security Tilt Turn, Casement Inswing Includes: 1 − Steel Security Striker 2 − #8x1 1/2″ Phillips flat head screws (11808110) |
LH RH |
10811767 10811768 |
 |
Striker, Tilt−Turn Tilt Turn Includes: 1 − Tilt−Turn Striker 2 − #8x1 1/2″ Phillips flat head screws (11808110) |
LH RH |
10811746 10811747 |
 |
Corner Drive, Stay Tilt Turn Includes: 1 − Corner Drive, Stay 2 − #6x1 1/2″ Phillips flat head screws (11800103) |
10811714 | |
 |
Corner Drive, Tilt−Turn Tilt Turn, Casement Inswing Includes: 1 − Corner Drive Tilt−Turn 1 − #6x1 1/2″ Phillips flat head screws (11800103) |
10811713 | |
 |
Corner Drive, E−Cam Tilt Turn, Hopper, Casement Inswing Includes: 1 − Corner Drive, E−Cam 2 − #6x1 1/2″ Phillips flat head screws (11800103) |
10811700 | |
 |
Corner Drive, Special Tilt Turn, Hopper, Casement Inswing Includes: 1 − Corner Drive, Special 2 − #6x1 1/2″ Phillips flat head screws (11800103) |
10811759 | |
 |
Groove Packer/Spacer Tilt Turn, Hopper, Casement Inswing K606A81 |
10815171 | |
 |
Mishandling Device, Frame Tilt Turn, Casement Inswing Includes: 1 − Mishandling Device, Frame 2 − #8x1 1/2″ Phillips flat head screws (11808110) |
10811744 | |
 |
Mishandling Device, Sash Tilt Turn, Casement Inswing Includes: 1 − Mishandling Device Sash 1 − #6x1 1/2″ Phillips flat head screws (11808103) |
10811745 | |
 |
Arm, Sash Stay Tilt Turn Includes: 1 − Sash Stay Arm 290−410, 150mm 290−410, 150mm 411−600, 250mm 411−600, 250mm 601−800, 350mm 601−800, 350mm 801−1400, 500mm 801−1400, 500mm |
LH RH LH RH LH RH LH RH |
10811715 10811716 10811717 10811718 10811719 10811720 10811721 10811722 |
 |
Bearing, Sash Stay Tilt Turn, Casement Inswing Includes: 1 − Bearing 3 − #8x1 1/2″ Phillips flat head screws (11808110) |
10811742 | |
 |
Pin, Sash Stay Bearing Tilt Turn, Casement Inswing Includes: 1 − Sash Stay Bearing Pin |
10811743 | |
 |
Additional Scissor Stay* Tilt Turn (sash and frame) Includes: 1 − Additional Scissor Stay (2 piece) 2 − #6x1 1/2″ Phillips flat head screws (11800103) 2 − #8x1 1/2″ Phillips flat head screws (11808110) * Unit must have 36″ minimum width |
10811769 | |
 |
Pivot Rest Tilt Turn, Casement Inswing LH or RH Corner Includes: 1 − Pivot Rest 3 − #8x1 1/2″ Phillips flat head screws (11808110) |
LH RH |
10811752 10811753 |
 |
Hinge Tilt Turn, Casement Inswing LH or RH Corner Includes: 1 − Hinge 6 − #6x1 1/2″ Phillips flat head screws (11800103) |
LH RH |
10811754 10811755 |
 |
Turn Restrictor Field Applied Kit Tilt Turn, Casement Inswing Includes: 1 − Turn Restrictor 335mm (10811774) (a) 1 − Bearing (10811775) (b) 1 − Groove Packer (10815171) (c) 4 − #6 x 1 1/2” Phillips flat head screws (11800103) (d) 2 − #8 x 1 1/2” Phillips flat head screws (11808110) (e) 1 − Instruction NOTE: This kit is for products with a minimum sash OSM width of 25 1/2 ” (648mm) AND built after 5/22/2006. |
11852602 | |
 |
Espagnolette Tilt Turn, Casement Inswing Includes: 1 − Espagnolette Sash O.M. Height |
10811723 10811724 10811725 10811726 10811727 10811728 10811729 10811730 10811731 10811732 10811733 |
|
 |
Espagnolette, Centered Handle Tilt Turn, Hopper, Casement Inswing Includes: 1 − Espagnolette Sash O.M. Height |
10811702 10811703 10811704 10811705 10811706 10811707 10811708 |
|
 |
Guide, Sash Stay Tilt Turn Includes: 1 − Sash Stay Guide Sash O.M. Width |
10811734 10811735 10811736 10811737 10811738 10811739 |
|
 |
Espagnolette Extension Tilt Turn, Hopper, Casement Inswing Includes: 1 − Extension 200mm 200mm w/Cam 400mm w/Cam 270mm (croppable) |
10811771 10811772 10811773 10811770 |
|
 |
Center Lock Tilt Turn, Casement Inswing Includes: 1 − Center Lock 600mm 600mm w/connector |
10811750 10811751 |
|
 |
Snubber (Sash) Hopper 872833 Includes: 1 − Sash snubber 2 − #6x1 1/2″ Phillips flathead wood screws (11808103) |
10815147 | |
 |
Snubber (Frame) Hopper 873267 Includes: 1 − Frame snubber 2 − #8x1 1/2″ Phillips flathead wood screws (11808110) |
10815148 | |
 |
Hinge, Stainless Steel Hopper  |
|
10814431 10814436 10814432 10814433 10814434 10814435 |
 |
Restrictor, 90" Travel Hopper, Casement Inswing Includes: 1 − Restrictor |
10811710 | |
 |
Tilt Stay Hopper Includes: 1 − Tilt Stay 2 − #6x1 1/2″ Phillips flat head screws (11800103) 2 − #8x1 1/2″ Phillips flat head screws (11808110) |
10811711 | |
 |
Center Lock Hopper Includes: 1 − Center Lock |
200mm 400mm |
10811776 10811709 |
 |
Rebate Hinge, Arm Casement Inswing Includes: 1 − Rebate Hinge, Arm |
LH RH |
10811763 10811766 |
 |
Rebate Hinge, Sash Casement Inswing Includes: 1 − Rebate Hinge, Sash 3 − #6x1 1/2″ Phillips flat head screws (11800103) |
10811762 | |
 |
Turn Only Rebate Hinge with Alignment Casement Inswing Includes: 1 − Turn Only Rebate Hinge 4 − #6x1 1/2″ Phillips flat head screws (11800103) |
10815174 | |
 |
Allen Wrench P010A 24 5/32" hex wrench with recessed 3/32" end |
10815357 | |
 |
Vertical Bottom Hinge Cap (Sash) All Tilt Turn products NOTE: Field applied snap−on cover. |
RH White Bronze LH White Bronze |
10815359 10815361 10815360 10815362 |
 |
Bottom Hinge Cap (Frame) All Tilt Turn products NOTE: Field applied snap−on cover. |
RH White Bronze LH White Bronze |
10815363 10815365 10815364 10815366 |
 |
Top and Center Hinge Cap (Frame) Tilt Turn, Hopper, Casement Inswing Overall width 2 3/8″ (60) N391A0471 N391A0453 NOTE: Field applied snap−on cover. |
White Bronze |
10815347 10815348 |
 |
Top Hinge Cap, Round Top (Frame) Tilt Turn Round Top Overall width 2 3/8″ (60) N391A0671 N391A0653 NOTE: Field applied snap−on cover. |
White Bronze |
10815277 10815278 |
 |
Top and Center Hinge Cap, Round Top (Sash) Tilt Turn Round Top Overall width 2 3/8″ (60) N391A0571 N391A0553 NOTE: Field applied snap−on cover. |
White Bronze |
10815345 10815346 |
 |
Top and Center Hinge (Frame) Pin Puller Tool All Tilt Turn products P010A30 Can be used as a construction handle |
10815358 | |
Wood Parts
TO ORDER REPLACEMENT WOOD PARTS
When ordering replacement wood parts specify:
- Profile number
- Call number or rough opening
- Length
- Finish
| Ultimate Wood | Ultimate | ||
| W2120 | --- | Subsill |  |
| W2122 | --- | Narrow Subsill |  |
| W2124 | --- | Cutback Subsill |  |
| W7201 | --- | Sill Extension |  |
| --- | W7202 | Sill Filler |  |
| W7200 | W7204 | Jamb Extension (exterior) |  |
| W8647 | W8647 | Jamb Extension (interior) |  |
| W6100 | --- | Jamb Extension Filler |  |
| W4102 | W4102 | Wood Glazing Bead − IG |  |
| W4106 | W4106 | Wood Glazing Bead − SG |  |
| W4100 | W4100 | Wood Glazing Bead − SG − ADL |  |
Vinyl and Weatherstrip
When ordering replacement weather strip specify:
- Type of unit
- OM of sash measured from the interior
- Part number
- Description
| ILLUSTRATION NOT TO SCALE |
DESCRIPTION | COLOR | PART NUMBER |
 |
Gasket Weather Strip Specify length |
Black | 11900100 |
 |
Screen and Weep Channel V469 Attached with #6x3/4″ square drive truss head screws (11800675) |
White Bronze Beige |
15620000 15630000 15620001 |
 |
Weep Cover V470 |
Bronze Stone White Beige |
15632099 15631299 15631199 |
 |
Neoprene Setting Block for Reglazing 5/32″ x 15/16″ x 4″ |
10500300 | |
Sash Replacement
ORDERING REPLACEMENT OPERATOR OR STATIONARY SASH FOR TILT TURN, HOPPER AND INSWING CASEMENT
NOTE: Post 6/06/2006
To order replacement operating or stationary sash specify:
1. Size (call number or OM of sash)
2. Operation and handing
3. Glazing
4. Finish
5. Handle height (if other than standard)
6. Interior wood glazing bead profile
| Sash OM Height Measure from the Interior |
Handle Height | |
| 12 7/16″ − 20 5/16″ 20 3/8″ − 25 1/16″ 25 1/8″ − 32 15/16″ 33″ − 40 13/16″ 40 7/8″ − 48 11/16″ 48 3/4″ − 56 9/16″ 56 5/8″ − 64 7/16″ 64 1/2″ − 72 5/16″ 72 3/8″ − 80 3/16″ 80 1/4″ − 88 1/16″ 88 1/8″ − 95 15/16″ |
5 7/16″ 7 13/32″ 11 1/16″ 16 31/32″ 20 29/32″ 22 7/8″ 22 7/8″ 22 7/8″ 40 3/32″ 40 3/32″ 40 3/32″ |
 |
Screens and Screen Parts
ORDERING REPLACEMENT SCREENS FOR TILT TURN, HOPPER AND INSWING CASEMENT
Full screens are standard with aluminum surround and Hi−Transparency fiberglass mesh. Aluminum mesh is available as an option in black, charcoal, bright aluminum, or bright bronze. Determine the outside measurement of the existing screen. Surrounds are available in all standard and select colors.
When ordering replacement screen specify:
1. Size; If there is no existing screen to obtain the OM of the panel, determine the size of the EP by using the conversion chart below. The daylight opening is the measurement of the visible glass.
2. Color of surround;
3. Glass type(if other than standard)
Screen Sizes for Tilt−Turn, Hopper and Inswing Casement
Manufactured between 1984−Present
Daylight Opening to OM of Screen
Daylight Width + 3 1/2″ (89) = OM Width of Screen
Daylight Height + 4 5/16″ (110) = OM Height of Screen
NOTE: OM should not include lip.
NOTE: Screens feature plunger type mounting system.
TILT TURN, HOPPER AND INSWING CASEMENT SCREEN PARTS 2−27−2012 TO PRESENT
| ILLUSTRATION NOT TO SCALE |
DESCRIPTION | COLOR | PART NO. |
 |
Plunger and Spring Assembly Used 2/2012 to present Includes: 1 − Plunger bolt (metal) 1 − Plunger bolt cap (black) 1 − Plunger bolt spring |
Black | 10500706 |
 |
Screen Mounting Receptacle M111 |
White | 05070411 |
Interior Energy Panels and Parts
ORDERING REPLACEMENT ENERGY PANELS FOR TILT TURN, HOPPER AND INSWING CASEMENT
If you are replacing an existing energy panel, determine the outside measurement of the existing energy panel. If there is no existing energy panel from which to obtain the OM of the panel, determine the size of the energy panel by using the conversion below. The daylight opening is the measurement of the visible glass. Energy panels are available in a white aluminum surround (interior panel).
NOTE: Interior energy panel surround changed from vinyl to metal in 1994. Replacement vinyl parts are not available. Metal surround models are compatible with all Tilt Turn, Hopper and Inswing Casement units.
When ordering energy panels specify type of unit, size and glass type.
Interior Energy Panels for Tilt Turn, Hopper and Inswing Casement
Manufactured between 1984 − Present
Daylight Opening to OM of IEP
Daylight Width + 1 3/8″ = OM Width of IEP
Daylight Height + 1 3/8″ = OM Height of IEP
TILT TURN, HOPPER AND INSWING CASEMENT ENERGY PANEL PARTS
When ordering energy panels parts specify quantity, description of part including color and part number.
| ILLUSTRATION NOT TO SCALE |
DESCRIPTION | COLOR | PART NO. |
 |
Corner Key, Interior Energy Panel M950 |
15470016 | |
 |
Weatherstrip, Interior Energy Panel M0412 Specify Length |
White | 15610097 |
 |
Interior Energy Panel Surround, Aluminum Profile A149 For 1/8″ glass and 3/16″ glass Available in 150″ (3810) length Note: Must use V235 for 1/8″ glass |
White | 18600899 |
 |
Spline V235 For 1/8″ glass only Specify Length |
White | 15221211 |
 |
Interior Energy Panel Surround, Aluminum Profile A163 For 3/16″ featherweight laminated glass Available in 150″ (3810) length |
White | 18600898 |
Discontinued Frame and Sash Hardware Locations − Tilt Turn
Discontinued Parts (LA) − Limited Availability
When ordering replacement Tilt Turn parts specify:
- Type of unit
- Part number
- Description
In most cases, Tilt Turn hardware will feature model numbers stamped on individual parts. The fifth character of
the model number indicates the series (example − M490B32). The newest series hardware is sent for replacement. All model numbers are for reference only, Marvin part numbers are required when ordering replacement parts.
NOTE: Always determine handing of parts with Marvin standard, as viewed from the exterior (Hinged side). Vendor numbers provided view handing from interior. DO NOT SPECIFY USING VENDOR METHOD.
| ILLUSTRATION NOT TO SCALE |
DESCRIPTION | OPER./ COLOR |
PART NO. |
 |
Top Hinge Receiver (Frame) Tilt Turn, Casement Inswing N390A302 Includes: 1 − Top hinge receiver 3 − #8x1 1/2″ Phillips flathead wood screws |
10815266 | |
 |
Top Hinge Receiver Pin (Frame) Tilt Turn, Casement Inswing, Round Top F710D52 |
10815267 | |
 |
Bottom Hinge (Sash) Tilt Turn, Casement Inswing, Round Top N512A0310R N512A0310L Includes: 1 − Bottom hinge 6 − #6x1 1/2″ Phillips flathead wood screws 1 − #8x1 1/2″ Phillips flathead wood screws |
LH RH |
10815268 10815269 |
 |
Bottom Hinge Receiver (Frame) Tilt Turn, Casement Inswing, Round Top N512A0301R N512A0301L Includes: 1 − Bottom hinge receiver 3 − #8x1 1/2″ Phillips flathead wood screws |
LH RH |
10815270 10815271 |
 |
Strike Tilt Turn, Hopper, Casement Inswing, Round Top R604C51 Includes: 1 − Strike 2 − #8x1 1/2″ Phillips flathead wood screws |
10815112 | |
 |
Strike, Corner Tilt Turn, Casement Inswing, Round Top R604C52 Includes: 1 − Strike 2 − #8x1 1/2″ Phillips flathead wood screws |
10815111 | |
 |
Tilt Position Clip Tilt Turn F400C20 |
10815197 | |
 |
Corner Drive R600A01 Tilt Turn Includes: 1 − Corner drive 4 − #6 x 1 1/2″ Phillips flathead wood screws NOTE: For units with sash OM of 14 11/16″ − 18 21/32″. |
10815040 | |
 |
Corner Drive Tilt Turn R600A11 Includes: 1 − Corner drive 6 − #6 x 1 1/2″ Phillips flathead wood screws NOTE: For units with sash OM of 18 11/16″ and above. |
10815039 | |
 |
Friction Limiter Tilt Turn, Casement Inswing NOTE: Both Sash (A) and Frame (B) parts must be ordered for a complete assembly . Spacer (10815171) is used with friction assembly and should also be ordered. Sash (A) K011B204 Used when daylight opening of the unit is 13 7/8″ to 15″. K011A25 Used when daylight opening of the unit is over 15″. Frame (B) Friction Bearing Stop KO11A11 Includes: 1 − Friction limiter assembly 4 − #8 x 1 1/2″ Phillips flathead wood screws (frame) 4 − #6 x 1 1/2″ Phillips flathead wood screws (sash) |
(A) through 15″ 10815302 (A) over 15″ 10815169 (B) 10815168 |
|
 |
Stabilizer Arm Assembly Tilt Turn F502A70 Includes: 1 − Stabilizer arm assembly 4 − #6 x 1 1/2″ Phillips flathead wood screws (sash) 3 − #8 x 1 1/2″ Phillips flathead wood screws (frame) |
10815175 | |
 |
Spacer Tilt Turn, Casement Inswing, Round Top R600A43 |
10815095 | |
 |
Security Lock Tilt Turn, Casement Inswing M811A29 M811A20 Includes: 1 − Lock with strike 2 − #7x1″ slotted flathead screws (strike) 2 − #7x1 1/2″ slotted flathead screws (lock) |
White ZYD |
10815120 10815125 |
 |
Security Key Tilt Turn, Casement Inswing |
White ZYD |
10815127 10815126 |
 |
Hinge Hopper  |
Check for availability |
|
 |
Sash Limiter Assembly Hopper F010D10 Includes: 1 − Sash limiter assembly 4 − #6x1 1/2″ Phillips flathead wood screws (sash) 2 − #8x1 1/2″ Phillips flathead wood screws (frame) |
10815176 | |
 |
Top Corner Connector Hopper, Casement Inswing M720A11 Includes: 1 − Top corner connector 3 − #6x1 1/2″ Phillips flathead wood screws |
10815202 | |
 |
Shim Hopper, Casement Inswing M490A38 |
10815157 | |
 |
Top Hinge (Sash) Casement Inswing N612A0320R N612A0320L Includes: 1 − Top hinge 5 − #6x1 1/2″ Phillips flathead wood screws |
LH RH |
10815274 10815275 |
 |
Center Hinge (Sash) Casement Inswing N612A0360 Includes: 2 − M490A38 spacers |
10815276 | |
 |
Round Top Tilt Turn Hardware Round Top R608A08 Includes: 1 − Sash stay guide 1 − Keeper 1 − Connection 1 − Support ramp 1 − Support plate 13 − #6x1 1/2″ Phillips flathead wood screws (sash stay guide and connection) 2 − #8x1 1/2″Phillips flathead wood screws (support ramp) NOTE: Individual parts not available as separate items. |
10815272 | |
 |
Top Hinge Receiver (Frame) Round Top N390A034 Includes: 1 − Top hinge receiver 3 − #8x1 1/2″ Phillips flathead wood screws |
10815273 | |
 |
Safety Device, Sash Round Top M803A00R M803A00L Includes: 1 − Safety device 1 − #6 x 1 1/2″ Phillips flathead wood screws |
LH RH |
10815182 10815181 |
 |
Safety Device Spacer, Frame Round Top M802A95R M802A95L Includes: 1 − Spacer 2 − #8 x 1 1/2″ Phillips flathead wood screws |
LH RH |
10815184 10815183 |
 |
Round Top Tilt Turn Hardware Round Top R608C02 Includes: 1 − Sash stay guide 1 − Keeper 1 − Connection 1 − Support ramp 1 − Support plate 13 − #6x1 1/2″ Phillips flathead wood screws (sash stay guide and connection) 2 − #8x1 1/2″Phillips flathead wood screws (support ramp) NOTE: Individual parts not available as separate items. |
Check availability 10815166 |
|
 |
Top Hinge, Complete (Frame) Round Top Sash OM width Measured from the interior Attached with #8x 1 1/2" Phillips flathead wood screws 25 1/2" or less (F507B10) 25 17/32" − 33 3/8" (F507B20) 33 13/32" − 49 1/8" (X516B30) 49 5/32" − 64 7/8" (F507B40) |
Check availability 10815078 10815079 10815080 10815081 |
|
 |
4 mm Allen Wrench | 10815231 | |
 |
Round Top Stabilizer Arm Assembly Round Top R608C60 Includes: 1 − Stabilizer arm assembly 3 − #6x1 1/2″ Phillips flathead wood screws (sash) 4 − #8x1 1/2″ Phillips flathead wood screws (frame) |
10815223 | |
 |
Round Top Arch Lock Round Top R608A10 Includes: 1 − Arch lock 11 − #6x1 1/2″ Phillips flathead wood screws NOTE: Frame must have 20″ minimum radius for application. Lock must be formed to unit radius in the field. |
10815165 | |
 |
Extension and Lock Round Top R608B40 Includes: 1 − Extension and lock 4 − #6x1 1/2″ Phillips flathead wood screws |
10815172 | |
 |
Round Top Upper Lock Round Top R608B20 Includes: 1 − Extension and lock 4 − #6x1 1/2″ Phillips flathead wood screws NOTE: Frame must have less than 20″ radius for application. |
10815164 | |
 |
Top Hinge Cap (Frame) Used up to 10/97 Overall width 2 13/16″ (71) |
White Brown |
10815320 10815322 |
 |
Top Hinge Receiver (Frame) Used up to 1/26/00 M490B32 Includes: 1 − Top hinge receiver 4 − #8x1 1/2″ Phillips flathead wood screws |
10815156 | |
 |
Bottom Hinge (Sash) Used up to 1/26/00 R600C61R R600C61L Includes: 1 − Bottom hinge 3 − #6x1 1/2″ Phillips flathead wood screws 4 − #8x1 1/2″ Phillips flathead wood screws |
LH RH |
10815215 10815217 |
 |
Bottom Hinge Receiver (Frame) Used up to 1/26/00 R600B62R R600B62L Includes: 1 − Bottom hinge receiver 3 − #8x1 1/2″ Phillips flathead wood screws |
RH LH |
10815218 No longer available |
 |
Top Hinge (Sash) Used up to 1/26/00 M490B31 Includes: 1 − Top hinge 5 − #6x1 1/2″ Phillips flathead wood screws |
10815155 | |
 |
Vertical Bottom Hinge Cap (Sash) N591A0671L N591A0671R N591A0653L N591A0653R NOTE: Field applied snap−on cover. |
Pre 6/22/09 RH − White RH − Bronze LH parts are no longer available. Replace with current LH parts |
10815349 10815351 |
 |
Bottom Hinge Cap (Frame) N591A0571L N591A0571R N591A0553L N591A0553R NOTE: Field applied snap−on cover. |
Pre 6/22/09 RH White Bronze LH White Bronze |
10815353 10815355 10815354 10815356 |
 |
Vertical Bottom Hinge Cap (Sash) Used up to 1/26/00 |
LH White Brown RH White Brown |
10815331 10815337 10815330 10815336 |
 |
Top Hinge Cap (Frame) Used from 10/97 − 1/26/00 Overall width 2 3/8″ (60) |
Brown | 10815318 |
 |
Top Hinge Cap (Frame) Used from 10/97 − 1/26/00 |
White | 10815317 |
 |
Bottom Hinge Cap (Frame) Used up to 1/26/00 |
LH Brown White RH Brown White |
10815341 10815334 10815340 No longer available |
 |
Horizontal Bottom Hinge Cap (Sash)) Used up to 1/26/00 |
LH White Brown RH White Brown |
10815333 10815339 10815332 10815338 |
NOTE: Always determine handing of parts with Marvin standard, as viewed from the exterior (Hinged side). Vendor numbers provided view handing from interior. DO NOT SPECIFY USING VENDOR METHOD.
| Espagnolette Tilt Turn, Casement Inswing, Round Top |
 |
|
| Sash OM Height Measure from the Interior |
Handle Height | Model No. | Part No. |
| 25 3/32″ or less 25 1/8″ − 32 31/32″ 33″ − 40 27/32″ 40 7/8″ − 48 23/32″ 48 3/4″ − 56 19/32″ 56 5/8″ − 64 15/32″ 64 1/2″ − 72 11/32″ 72 3/8″ − 80 7/32″ 80 1/4″ − 88 3/32″ 88 1/8″ − 93 3/16″ |
7 7/16″ 11 1/8″ 16 15/16″ 20 15/16″ 22 15/16″ 22 15/16″ 22 15/16″ 44 9/16″ 44 9/16″ 44 9/16″ |
R601B10 R601B20 R601B40 R601B50 R601B60 R601B70 R601B80 R602B10 R602B20 R602B30 |
10815041 10815042 10815043 10815044 10815045 10815046 10815047 10815048 10815049 10815050 |
Attached with #6x1 1/2″ Phillips flathead wood screws.
Note: Handle height is measured from the bottom of the sash to the center of the espagnolette mechanism. In addition, if exact sash OM height is provided, the replacement espagnolette will be cut to the proper length.
| Sash Stay Guide Tilt Turn |
 |
|
| Sash OM Width Measured from the Interior |
Model No. | Part No. |
| 25 1/2″ or less 25 17/32″ − 33 3/8″ 33 13/32″ − 41 1/4″ 41 9/32″ − 49 1/8″ 49 5/32″ − 57″ 57 1/32″ − 64 7/8″ |
F502A10 F502A20 F502A30 F502A40 F502A50 F502A60 |
10815068 10815069 10815070 10815071 10815072 10815073 |
Attached with #6x 1 1/2″ Phillips flathead wood screws.
NOTE: If exact sash OM width is provided, the replacement sash stay guide will be cut to the proper length.
| Top Hinge (Sash) Tilt Turn |
 |
| Sash OM Width Measured from the Interior |
Model No. | Left Part No. | Right Part No. |
| 25 1/2″ or less 25 17/32″ − 33 3/8″ 33 13/32″ − 64 7/8″ |
F526A1200R/L F526A1300R/L F526A1500R/L |
10815260 10815262 10815264 |
10815261 10815263 10815265 |
| Model No. | Part No. | ||
 |
Variable Espagnolette (For Special Handle Height Only) Tilt Turn, Casement Inswing, Round Top |
R610A05 R610C11 R610C21 R610C31 R610C41 R610C51 |
10815051 10815052 10815053 10815054 10815055 10815056 |
| Attached with #6x1 1/2″ Phillips flathead wood screws. |
| Sash OM Width Measured from the Interior |
Model No. | Part No. | |
| Variable Espagnolette Hopper If sash height is over 37 3/16″ the following variable espagnolettes are used with extensions in addition to side strikes and locks. Attached with #6x1 1/2″ Phillips flathead wood screws. |
21 15/16″ or less 22″ − 40 7/16″ 40 1/2″ − 55 15/16″ 56″ − 69 3/16″ |
R610A05 R610C11 R610C21 R610C31 |
10815051 10815052 10815053 10815054 |
| Sash OM Width or Height Measured from the Interior |
Model No. | Part No. | ||
 |
Center Lock Tilt Turn, Casement Inswing, Round Top |
37 3/16″ − 47 5/32″ 47 3/16″ − 60 5/32″ 60 3/16″ − 72 5/32″ 72 3/16″ − 95 3/16″ |
R605A10 R605A20 R605A30 R605A40 |
10815105 10815106 10815107 10815108 |
Attached with #6x 1 1/2″ Phillips flathead wood screws
Note: If the width or height of the unit is less than 40″ no center lock is required on that side.
| Sash OM Height Measured from the Interior |
Model No. | Part No. | |
| Center Lock Hopper Attached with #6x 1 1/2″ Phillips flathead wood screws |
37 1/4″ − 40 3/16″ 40 1/4″ − 48 3/16″ 48 1/4″ − 52 3/16″ 52 1/4″ − 55 3/16″ 55 1/4″ − 59 3/16″ |
R605A10 R605A10 R605A20 R605A20 R605A20 |
10815105 10815105 10815106 10815106 10815106 |
 |
Extension and Lock Tilt Turn, Casement Inswing R608B40 Includes: 1 − Extension and lock 4 − #6x1 1/2″ Phillips flathead wood screws |
10815172 |
 |
Bottom Extension Tilt Turn, Casement Inswing R610A02 Includes: 1 − Bottom extension 4 − #6x1″ Phillips flathead wood screws |
10815058 |
| Round Top Connection Round Top Attached with #6x1 1/2″ Phillips flathead wood screws. Note: Units with a sash springline over 75 1/2″ require Extension and Lock 10815172. |
 |
| Sash OM Width Measured from the Interior |
Bottom of Sash to Springline |
Model No. | Part No. |
| 28″ or less 28 1/32″ − 42 3/4″ 42 25/32″ − 56 1/2″ 56 17/32″ − 70 1/2″ |
36″ or less 36 1/32″ − 48″ 48 1/32″ − 62″ 62 1/32″ − 75 1/2″ |
R608A72 R608A73 R608A74 R608A75 |
10815151 10815152 10815153 10815154 |
| |
Sash OM Width Measured from the Interior |
Model No. | Part No. |
|
 |
Operator Hopper If sash height is 37 3/16″ or less the following operators are used: Attached with #6x1 1/2″ Phillips flathead wood screws |
23 13/32″ or less 23 7/16″ − 37 3/16″ 37 1/4″ − 42 11/16″ 42 3/4″ − 58 11/16″ 58 3/4″ − 69 3/16″ |
M500A90 M500A10 M500A20 M500A30 M500A40 |
10815303 10815160 10815161 10815162 10815163 |
Discontinued Parts (NA) − No Availability
| ILLUSTRATION NOT TO SCALE |
DESCRIPTION | COLOR | PART NO. |
 |
Security Lock | Metal Gray White |
No longer available |
 |
Escutcheon Plate R033A15 |
Bronze | No longer available |
 |
Removable Handle (for Escutcheon) R033A22 |
New Silver | No longer available |
 |
Pistol Grip Handle | Gold | No longer available |
 |
Designer Handle | Brass | No longer available |
 |
Weep Cover V470 |
Pebble | No longer available |
 |
Top Hinge Cap (Frame) Used up to 10/97 |
White Brown |
No longer available |
 |
Round Top Tilt−Turn Safety Device R609A20 |
No longer available |
|
 |
Top Hinge Cap (Frame) Used from 10/97 − 1/26/00 Overall width 2 3/8″ (60) |
White | No longer available |
 |
Top Hinge Cap (Frame) Used from 10/97 − 1/26/00 |
Brown | No longer available |
 |
Snubber (Sash), Inswing Casement Used from 10/97 − 9/00 M490A35 Hopper |
No longer available |
|
 |
Snubber (Frame), Inswing Casement Used from 10/97 − 9/00 M490A36 Hopper |
No longer available |
|
 |
Adjustment Wrench 13mm |
No longer available |
|
Discontinued Sash Replacement (LA) − Limited Availability − Pre 6/6/2006
ORDERING REPLACEMENT OPERATOR OR STATIONARY SASH FOR TILT TURN, HOPPER AND INSWING CASEMENT
NOTE: This information is for sash produced prior to 6/06/2006.
To order replacement operating or stationary sash specify:
1. Size (call number or OM of sash)
2. Operation and handing
3. Glazing
4. Finish
5. Handle height (if other than standard)
| Sash OM Height Measure from the Interior |
Handle Height | |
| 25 3/32″ or less 25 1/8″ − 32 31/32″ 33″ − 40 27/32″ 40 7/8″ − 48 23/32″ 48 3/4″ − 56 19/32″ 56 5/8″ − 64 15/32″ 64 1/2″ − 72 11/32″ 72 3/8″ − 80 7/32″ 80 1/4″ − 88 3/32″ 88 1/8″ − 93 3/16″ |
7 7/16″ 11 1/8″ 16 15/16″ 20 15/16″ 22 15/16″ 22 15/16″ 22 15/16″ 44 9/16″ 44 9/16″ 44 9/16″ |
 |
Note: Handle height is measured from the bottom of the sash to the center of the espagnolette mechanism.
Discontinued Screens and Screen Parts − (LA) − Limited Availability − Pre 2/27/2012
ORDERING REPLACEMENT SCREENS FOR TILT TURN, HOPPER AND INSWING CASEMENT
Full screens are standard with aluminum surround and Hi−Transparency fiberglass mesh. Aluminum mesh is available as an option in black, charcoal, bright aluminum, or bright bronze. Determine the outside measurement of the existing screen. Surrounds are available in all standard and select colors.
When ordering replacement screen specify:
1. Size; If there is no existing screen to obtain the OM of the panel, determine the size of the EP by using the conversion chart below. The daylight opening is the measurement of the visible glass.
2. Color of surround.
3. Glass type(if other than standard).
Screen Sizes for Tilt−Turn, Hopper and Inswing Casement
Manufactured between 1984−Present
Daylight Opening to OM of Screen
Daylight Width + 3 1/2″ = OM Width of Screen
Daylight Height + 4 5/16″ = OM Height of Screen
NOTE: OM should not include lip.
NOTE: Screens feature plunger type mounting system.
TILT TURN, HOPPER AND INSWING CASEMENT SCREEN PARTS PRE 2−27−2012
| ILLUSTRATION NOT TO SCALE |
DESCRIPTION | COLOR | PART NO. |
 |
Plunger and Spring Assembly M0102 Includes: 1 − Plunger bolt (metal) 1 − Plunger bolt cap (black) 1 − Plunger bolt spring |
Black | No longer available |
 |
Screen Mounting Receptacle M111 |
White | 05070411 |
 |
Corner Key Screen M0121 |
15225301 | |
 |
Screen Surround, Aluminum Profile A133 Available in 168″ (4267) length |
Stone White Bronze Pebble Brown Evergreen |
18801100 15231799 15231899 15231699 15231999 |
Discontinued Screen Parts − (NA) − No Availability − Pre 2/27/2012
TILT TURN, HOPPER AND INSWING CASEMENT SCREEN PARTS PRE 2−27−2012
| ILLUSTRATION NOT TO SCALE |
DESCRIPTION | COLOR | PART NO. |
 |
Spline, Screen V1269 |
Black | No longer available |
 |
Spline, Screen V129 |
Black | No longer available |